3D model

The RasQberry project

3D model

An enclosure (3D model) of the IBM Q System One can be used for RasQberry. STL files are available at https://github.com/JanLahmann/RasQberry_enclosure (original source: https://github.com/BAndiT1983/RasQberry_enclosure). This is based on an idea of Andy Stanford-Clark (https://github.com/andysc/IBM-Q-System-One-3D-model). Additional instructions for assembling the enclosure and all components (Raspberry Pi, 4’’ touchscreen display, battery pack inside the enclosure, etc) will be provided later.

drawing

Assembly for Version 5.5

Go back to: Content
Go back to: Start Page